[KERNEL] [RCMIX Evo 3D] [ 2.6.35.14][CIFS][TUN][NLS][OC 1.7ghz]

[klquicksall]

RCMIX EVO 3D KERNEL

V(R),deadline,bfq,noop,cfq NOOP as default I/O
SLQB
WIFI FIX
CIFS
TUN
NLS
2WCR
VDD interface
WIMAX SUPPORT
Wifi Tweak to connect a weaker signal -108db over stock -88db
SUPER FAST and SMOOTH

AND MORE


THIS KERNEL IS ONLY FOR CUSTOM ROMS

IF YOU WANT TO CHANGE YOUR VOLTAGE DOWNLOAD CPU TUNER BY 3C FROM THE MARKET

DOWNLOAD BELOW

PURE KERNEL 1.3

PURE KERNEL 1.2

Lots of goodness

call record apk

If you are having problems listing to the call recording you should change it to an mp3 file thanks to shmeek for figuring it out

Any OC past 1.8 has been reported a little unstable so use at your own risk. Lets see who can go the highest. MAKE A BACKUP JUST IN CASE

I need people to test and let me know

1 if it flashes
2 the max clock and min using setcup
3 if someone could post a screen shot of the kernel info page.


Changelog
V1.3
added lagfree cpu gov
added smartass2 cpu gov
added bfq IO sched
added V(r) IO sched
enabled swap
Ondemand 2 phase tweaks
lots of code changes
OC tweaks to 1.78
voltage tweaks

V1.2
basted off of HTC EVO3D OTA
added call record
OC to 1512

Pure kernel

V13.1
fixed the OC

V13
added HTC ondemand gov named intellimand its supposed to be a better ondemand. Test and let me know
added updated configs
updated freq table and voltage
probably more.

V12
NO GO

V11
added lagfix gov
updated configs
xz compression updating git (should make smaller kernel better performance )

v10
removed vdd for now its not working right
added the ability to turn your flash light on until your battery reaches 10% not 30% ;) saved your life
added support for xz compression on boot.
some other code changes see git for all the changes.

V9.0
added VDD interface to allow changing your voltage
tweaked call record should be fixed now.

8.0
added all wifi tweaks back in. wifi is awesome now.

7.0
OC working right now. Fixed cpu table cayniarp/flaux123

6.0
fixed cpu table(cayniarb)
added all the goodies back in.

5.0
based off of new gb source

4.3.1
tweaked cpu table again.

4.3
added steps into the cpu table
other small edits

4.2
patched to 2.6.35.14
OC to 1.84 only
cleaned up some of the cpu table.

3.0
added 2WCR

2.2.3
fixed cpu table thanks to cayniarb

2.2
to many bugs

2.1
fixed missing step at 1.72

2.0
added many cpu steps OC to 2ghz
other fixes and added files to the kernel source.

1.3
OC to 1.7

1.2
testing only

1.0
initnal release

CPU TABLE

{ {0, 0}, MAX_AXI, ACPU_AFAB, 1, 0, 0, 0, L2(0), 875000, 0x03006000},
{ {1, 1}, 384000, ACPU_PLL_8, 3, 0, 0, 0, L2(1), 875000, 0x03006000},
{ {1, 1}, 432000, ACPU_SCPLL, 0, 0, 1, 0x08, L2(1), 887500, 0x03006000},
{ {1, 1}, 486000, ACPU_SCPLL, 0, 0, 1, 0x09, L2(2), 912500, 0x03006000},
{ {1, 1}, 540000, ACPU_SCPLL, 0, 0, 1, 0x0A, L2(3), 925000, 0x03006000},
{ {1, 1}, 648000, ACPU_SCPLL, 0, 0, 1, 0x0C, L2(5), 950000, 0x03006000},
{ {1, 1}, 702000, ACPU_SCPLL, 0, 0, 1, 0x0D, L2(6), 975000, 0x03006000},
{ {1, 1}, 756000, ACPU_SCPLL, 0, 0, 1, 0x0E, L2(7), 1000000, 0x03006000},
{ {1, 1}, 810000, ACPU_SCPLL, 0, 0, 1, 0x0F, L2(8), 1012500, 0x03006000},
{ {1, 1}, 864000, ACPU_SCPLL, 0, 0, 1, 0x10, L2(9), 1037500, 0x03006000},
{ {1, 1}, 918000, ACPU_SCPLL, 0, 0, 1, 0x11, L2(10), 1062500, 0x03006000},
{ {1, 1}, 972000, ACPU_SCPLL, 0, 0, 1, 0x12, L2(11), 1087500, 0x03006000},
{ {1, 1}, 1026000, ACPU_SCPLL, 0, 0, 1, 0x13, L2(12), 1125000, 0x03006000},
{ {1, 1}, 1080000, ACPU_SCPLL, 0, 0, 1, 0x14, L2(13), 1137500, 0x03006000},
{ {1, 1}, 1134000, ACPU_SCPLL, 0, 0, 1, 0x15, L2(14), 1162500, 0x03006000},
{ {1, 1}, 1188000, ACPU_SCPLL, 0, 0, 1, 0x16, L2(15), 1187500, 0x03006000},
{ {1, 1}, 1296000, ACPU_SCPLL, 0, 0, 1, 0x18, L2(15), 1187500, 0x03006000},
{ {1, 1}, 1404000, ACPU_SCPLL, 0, 0, 1, 0x1A, L2(16), 1187500, 0x03006000},
{ {1, 1}, 1512000, ACPU_SCPLL, 0, 0, 1, 0x1C, L2(16), 1250000, 0x03006000},
{ {1, 1}, 1620000, ACPU_SCPLL, 0, 0, 1, 0x1E, L2(16), 1250000, 0x03006000},
{ {1, 1}, 1728000, ACPU_SCPLL, 0, 0, 1, 0x20, L2(17), 1350000, 0x03006000},
{ {1, 1}, 1782000, ACPU_SCPLL, 0, 0, 1, 0x21, L2(18), 1375000, 0x03006000},
{ {1, 1}, 1836000, ACPU_SCPLL, 0, 0, 1, 0x22, L2(19), 1450000, 0x03006000},
{ {0, 0}, 0 },


I have to give a big thanks to netarchy for being the first to OC and DDiaz for testing for me and cayniarb for being a kernel master.

Similar Threads:

• [KERNEL] CM7/AOSP/RG Custom Smartass Kernel-SLAB-BFQ *OC->1.8GHz* ckisgen
• [Kernel][RCMIX 3D][CIFS][NLS][OC1.9][VDD][TUN][2WCR]
• [KERNEL][RCMIX ACS SGS2][ROOT][UV][CWM][OC]
• [Kernel]Zedomax Epic Touch Kernel [1.6Ghz OC][Quadrant 4000+][ACS][Pre-rooted][CWM][V3]

[klquicksall]

RCMIX BETA KERNELS

in the works as always

[klquicksall]

OLD DOWNLOADS

RCMIX EVO3D V13.1

RCMIX EVO3D V13 fail

RCMIX EVO3D V12 NO GO

RCMIX ACS EVO3D V11

RCMIX ACS EVO3D V10

RCMIX ACS EVO3D V9

RCMIX ACS EVO3D V8
http://www.multiupload.com/9TTZK0P6KS

RCMIX ACS EVO 3D V7
http://www.multiupload.com/1W2LM21LBQ

RCMIX ACS EVO3D 2WCR V7
http://www.multiupload.com/ZK2X900AN1

RCMIX EVO 4.3

RCMIX EVO 4.3.1

RCMIX EVO 2.2.3

RCMIX EVO 3.0

RCMIX EVO 4.0

RCMIX EVO 4.1

RCMIX EVO 4.2

[rjmjr69]

Awesome trying this bad boy out Can you slow the wifi scan down its draining battery.

[klquicksall]

Awesome trying this bad boy out

I have set to fast right now. I can set it to stock scan rate. Maybe that will make a difference. Ill put out an update and see if people like it or not.

[rjmjr69]

I have set to fast right now. I can set it to stock scan rate. Maybe that will make a difference. Ill put out an update and see if people like it or not.

Can you go slower than stock? I am running a completely stock kernel and rom. Besides being rooted right now

[klquicksall]

Ill give it a shot and see what happens. I'll post it as a beta kernel for testers. If people get better results Ill make the next release.

[rjmjr69]

Nice thanks Can't wait to try it out.

[AkaTheMacDaddy]

I can't believe my favorite 3VOKernel Guy klquicksall is in our Forums!" I want to be one of the first to welcome you!"

[klquicksall]

I can't believe my favorite 3VOKernel Guy klquicksall is in our Forums!" I want to be one of the first to welcome you!"

Good to see you here too. I'm working on a beta kernel today.