[HELP me please]clockworkmod recovery>advanced and debugging menu>show log...

[Pinke_lee_1979]

I really need help with this issue.

Show log: CWM-based Recovery v5.0.2.7
ro.bootmode=unkown
ro.baseband=unknown
ro.carrier=unknown
ro.bootloader=unknown
ro.hardware=schr720
ro.revision=7
ro.emmc=0
init.svc.recovery=running
init.scv.adbd=running

I:Checking for extendedcommand..
I:Skipping execution of extended not found...

key Test:
Outputting key codes.
Go back to end debugging.
key:102

report error:
key:158

partition SD card:
128m
256m
512m
102m
2048m
4096m

fix permissions:
fixing permissions...
done!

I came to one of the only places that i knew of to ask for guidance or help or anything...i know of many but sometime they just dont answer my questions or query so i came here since this is the place i found the original info on the admiral beast cwm, theme,and odin/ops files....thanks by the way...

basically i have not bricked my phone...it still runs...my pc still recogizes it when i connect via usb as long as i am in 'mounts and storage>mount usb storage>unmount....but i also have a starting business and i really need my phone to work...

i just wonder if i need to do the steps again or something....i have cwm recovery installed....is it possible that i need to do odin and ops and theme and .tar files again....

i really do believe in donations...as long as one could wait until payday.....

pinke

[zachdroid]

Have you tried reflashing cwm, maybe through Fastboot? It sounds like a recovery issue to me. Odin would fix it I'm sure because it overwrites everything. I would try a fresh recovery flash to see if that helps.

Zach

[Pinke_lee_1979]

well im not sure if it will let me ..it wont let me into any part of the phone at all..here are the exact steps i did.

STEP ONE: ROOTING

(ADMIRE-ROOT-WINDOWS.ZIP)

How to Install

Your device must be in USB Debugging mode.

Windows: Install the Samsung USB drivers , unpack the archive, and open run.bat.

(INDULGE-DRIVERS.EXE)
remapping camera

HOW TO REMAP MUVE BUTTON FOR CAMERA

1. Root the phone . Make sure you installed a superuser from the market.

2. Install root explorer.

3. Open the root explorer and go to /system/usr/keylayout

4. Tap sec_key.kl and open with Text Editor

5. Go to "# handling for touch-key codes"

6. replace in

"key 766 MUVE_SCREEN WAKE_DROPPED"
MUVE_SCREEN -> CAMERA

so it will look like
"key 766 CAMERA WAKE_DROPPED"

and

"key 528 MUVE_PLAY WAKE_DROPPED"
MUVE_PLAY -> FOCUS
so it will look like
"key 528 FOCUS WAKE_DROPPED"

7. Hit BACK button, it will ask you if you want to save, confirm it.
It will create a backup file.

8. Reboot the phone.


On active phone push the button all way down and hold to call a camera app.
Inside of the camera app half press to focus, full press to shot.

STEP TWO: ROOTING

1. Download ODIN >>>HERE<<<(odin_multi_downloader_v4.42.bin)

2. Download OPS file >>>HERE<<<(SCHR720.OPS)
3. Download CWM >>>HERE<<<(Admire-CWM.tar)
4. Download drivers>>>HERE<<<(MetroPCS_ADMIREdrivers.bin)
5. Create new folder and call it whatever you want, extract ODIN here and place the OPS and CWM files in here as well. This makes it easy to find everything.
6. Open drivers and install, if you don’t understand, you probably shouldn’t be attempting this yet.
7. Put your Admire in download mode, disconnect USB and pull battery. Put battery back in and press volume down, camera and power. Count to 3 and release, you should see instructions saying press volume up to continue, do so. This is not easy, keep trying, you’ll get it.
8. Open device manager and make sure your computer recognizes your device.
9. Go to the folder you created and double-click the ODIN downloader, this should start ODIN.
10. Make sure you have a yellow “com” box, if not, you did something wrong, start over.
11. In the downloader select OPS file and when prompted, CWM file in your new folder.
12. Now, press start. You should see some action in the top left corner of the downloader, when it says done, you’re done! Congratulations!
13. Disconnect USB and pull battery. Put battery back in, press volume down, back and power buttons. Release when you see CWM.
14. Navigate recovery with volume buttons, scroll down to back up/restore, select back up using the home button for selections.

but instead this method....

ANOTHER PAGE FOR CWM

How to put phone into download mode:

1) Unplug USB, remove battery
2) Re-insert battery
3) Hold down CAMERA button
4) Plug in USB
5) After 4 seconds you will see a screen with a warning about installing a custom OS, with an option to continue (VOL+) or cancel (VOL-).


Installing ClockworkMod:

Basic ODIN instructions:
1) open odin
2) put your phone into download mode and press Volume Up to continue.
3) connect the phone
4) ensure that you have a yellow com# box (see attached picture)
5) Select the ops file in the ops box (SCHR720.ops is in the zip with odin)
6) in the check boxes in the top left make sure one package and auto reboot are selected
7) in the bottom one package box select the desired tar (admire-cwm.tar that you downloaded)
8 ) click start! Your phone will reboot when finished and you can close out Odin.

Recovery mode for the Admire/Vitality:

1) Turn phone off.
2) Press and hold Back, Volume Down, and Power keys.
3) Continue holding all three keys until device powers on and recovery menu appears.

Navigate using volume up/down keys, and Home key for enter.

STEP THREE: ROOTING

CWM Installed(ADMIRAL-BEAST-CWM.ZIP)
Installation
1) Download Rom
2) Boot into recovery
3) Wipe data, cache, dalvik cache
4) Format system & data ( its in mounts n storage )

5) Install zip from sd-card

STEP FOUR: ROOTING

Windows only
Must be rooted running 2.3.4
Must have adb installed.
Installation
1) Download Rom
2) Unzip the Rom
3) Enable USB debugging
4) Double Click run.bat

5) Follow on screen instructions

(ADMIRAL_BEAST_V.01(1).ZIP)

.how do you reflash when i cant get past the recovery mode..it will let me turn off phone but it goes nowhere but reboot into recovery screens...im clueless.or i wouldve already figured it out by now

i will after coffee...but still any other pointers from anyone would be most welcome.

[xxDirtGirlxx]

I need ...

I rooted my admire .. it was working fine for 2 days now .. then today my battery died while at work when i got to my car i plugged it in and it started to boot back up but got stuck on the samsung screen .. I tried to do the wipe data/factory reset in the system restore mode and at the bottom of the recovery page in yellow it says :

E:PATH:/data/update_sucess
E:update file is backed up:not updated
#MANUAL MODE#

--WIPING DATA--
Formatting Data...
Formatting Cache...
Data wipe complete.
E:File is written: not updated

so then i chose option " reboot system now "

and it starts to reboot and then it vibrates a few times and an error box pops up and says :

Sorry!
The application Setup Wizard
(process com.android.setupwizard)
has stopped unexpectedly. please try again.
Force Close

then it goes to what would be my home screen and the time shows in the corner and shows i have a full battery .. but i cannot do anything, its a black screen i cant click menu or home or anything ...

I tried to go to download mode by holding the camera button and plugging in the USB and then the warning screen came on, i pressed the volume up to accept .. then the next screen says:

ODIN MODE
PRODUCT NAME: SCH-R720
CUSTOM BINARY DOWNLOAD: 0
CURRENT BINARY: OFFICIAL
(and in the middle of the screen in yellow says)
Downloading...

i installed all the files you said to install and when i click start on the ODIN DOWNLOADER it says :

PLEASE CONNECT PHONE

my phone was connected, it wont detect my phone ... the samsung USB drivers are installed already ...

I dont know what to do ...

[Pinke_lee_1979]

how do you download the rom/update.zip do you use odin downloader because i have tried everything else and need immediate advice